Preconfigured ROM images
for Glitch Works XT-IDE Rev 4 (or 4A) (or 4B)
XUB version R625
This version/release is recent, being dated FEB 2023.
XUB R625 for Glitch Works XT-IDE Rev 4.bin
The above BIN file is configured for:
• Glitch Works XT-IDE Rev 4
• Glitch Works XT-IDE Rev 4 switches set to base I/O address (I/O port) of 300h
• Glitch Works XT-IDE Rev 4 jumpers set to hi-speed mode
There are two options for using the BIN file:
• With this preconfigured BIN file (preconfigured for the Glitch Works XT-IDE Rev 4), you can use an EPROM programmer to program a 28C64 EEPROM.
• Or use XTIDECFG.COM supplied with this XUB version (see here) to write this preconfigured BIN file (preconfigured for the Glitch Works XT-IDE Rev 4) directly to a 28C64 EEPROM fitted to the Glitch Works XT-IDE Rev 4.
If using this to upgrade from a much older version, then sometimes, you may need to redo the FDISK/FORMAT operations on the CF card.
Technical: This is the IDE_XT.BIN file from the released R625 package, reconfigured using XTIDECFG.COM as follows: 'Device type' setting changed to 'XT-IDE rev 2 or modded rev 1'.